Laguna LT24 x 24 Band Saw 7.5hp, 1PH or 3PH, 220V

Price
$ 7,699

Have questions? Give us a call at 260-637-0054.

When Torben was developing the Laguna line of Bandsaws, he designed the LT24 x 24 with a specific woodworker in mind, the wood turner. Manufactured in the northern area of Italy, this beast has two feet of resawing capacity, which is beneficial when you are preparing large bowl blanks. In addition, the significant cast-iron table is capable of handling the wood without obstruction.

The LT24 x 24 allows you to have the flexibility of producing work performed on very narrow blades for scroll work but on a much larger machine. This is Torben’s favorite saw because of the versatile performance it allows the woodworker, which is much the same as Laguna's best selling smaller bandsaws but in a larger machine.

Most blade guide systems are designed to support the blade on the sides, and then either above or below the side guides to support the back of the blade. This forces the blade to twist as pressure from the wood being cut is transferred to the back blade guide. Laguna Guides solve this problem by supporting the blade on the sides above and below the back blade guide. By eliminating all blade twist, the Laguna Guide gives the blade unsurpassed stability. 

The Laguna Guide System utilizes 10 points of contact, 4 more than traditional guide systems. It features "Space Age" ceramic guide blocks as both side and thrust support. This enables the ceramic piece to gently touch the side of the blade, on all three sides without heat build-up, therefore giving stability, which has never been achieved before.

Also available with a 5hp motor.

Optional Blades:

  • Resaw KingCarbide-tipped resaw blades. The carbide tips outlast standard blades many times over and can be re-sharpened. The profile of the carbide tipped teeth is optimized to provide a thin kerf and smooth finish cuts in woods. A 3/4" blade width is recommended for resawing on the 14|CX Band Saw.
  • Pro-Force BladesSwedish silicon steel blades with heat-treated teeth and rear surface (on wider blades). The Pro-Force Blades out perform standard carbon steel blades. These blades are available in a wide range of widths and TPI. The narrowest blades are used for tight curved work. The medium widths are perfect for gentle curves, light weight straight cuts, and general purpose work. Higher tooth counts provide smoother cuts and are required for thinner stock. Lower tooth counts provide faster cutting, rougher surface, and are better for thicker stock.

Note: Blade is not included. Check out our selection of band saw blades here.

Features
  • 2 ft. of resawing capacity
  • Cast iron table
  • Flexibility of producing work performed on very narrow blades for scroll work but on a much larger machine
Specs

Motor: 7.5hp (Single or 3 Phase options)
Resaw: 24 “
Volts: 220
Amp Breaker: 40 / 1 – 40 / 3
Min. Blade: 1/8″
Max. Blade: 1-1/2″
Throat: 23-1/4 “
Table Size: 24 ” x 34-1/2″
Blade Length: 201″
Table Height: 35-1/2″
Total Height: 90″
Weight: 755 lbs.
Rack/Pinion: yes
Foot Brake: yes
Guides: Laguna Guides
Weight: 755 lbs.

SKU: MBAND245400-7.5HP

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)